Heliox UV MP Heliox UV MP 140

Heliox UV MP for public swimming pools Heliox UV MP (MP = medium pressure) devices are intended for use in public swimming pools. These lamps cover a broad spectrum (polychromatic), covering the entire UV-C region (200 nm - 300 nm), which allows an effective elimination of chloramines (< 0.6 ppm) in the pool water, as well as effective disinfection by inactivation of microorganisms (99.9%), even those resistant to chlorine. • Compact design (UV reactor in stainless steel AISI-316). • Power adjustable between 70 and 100% nominal, in 1% increments, by means of self-ventilated electronic ballast. • Fluidra technology (design and manufacture). • Calibrated UV-C radiation sensor (mW/cm²). Precise dose control. Instantaneous power adjustment to process conditions. Energy saving and lamp life time (8,000 hours lamp life). • Advanced color touch screen. Navigation menus for process and historical system parameters. • All UV MP 50-->450 and UV MP 50W-->450W models are UL NSF compliant. The proposed control architecture for the Heliox UV MP systems has a number of features that enable the highest levels of reliability, energy efficiency and scalability. The Heliox UV MP systems handle two parameters when setting the applied power: average radiation and flow rate (incorporating a calorimetric flow rate detector). Thus, each model has a nominal radiation to guarantee a dose of 60 mJ/cm². If the flow rate to be treated is lower than the nominal flow rate, the radiation required will also be lower and the system will reduce its power, optimizing power consumption and lamp life. Similarly, if the radiation decreases due to turbidity losses, scaling, lamp emission efficiency, the system will readjust the power to guarantee the dose.